Sams Shed

I have a Ford 8.8 inch diff from a EF/EB Ford Falcon with a Limited Slip Differential. I want to shorten it down to suit the 323. Due to the RX7 LCA in the front, the front tyres(205X50X15) now protrude from the front guards by 65mm. Making the overall front track width 1,675mm. With 225X50X15 tyres on the rear and the standard diff the rear is 1,610mm. Meaning that the rear track width is 32.5mm narrower on each side. To widen the rear when I shorten it, I'll make the rear axle 65mm wider than the standard rear axle. The standard 323 Diff width is 1,338mm and the Ford 8.8 is 1,547mm for a total difference of  209mm. So the Diff needs to be shortened by 209mm - 65 =  144mm or 72mm per side.

"It was the best of times, it was the worst of times" C.Dickens Long time no blog post, I guess most of the time I post on Instagram and neglect to come on here. In some ways it has been a good time for the shed and in other ways not so much. After moving house and getting a bigger shed I have more space, I've managed to purchase a Mill and a band saw as well as some other tooling. I've spend a fair bit of time mucking around with the front suspension and I think I have it how I want it now. Unfortunately with four children, the property, kids sport etc there is not a lot of time to spend in the shed, mostly later in the evening once everyone is in bed. I made a bit purchase and brought an RX7 FC, S5 13B motor in unknown condition with a MicroTech LT-9c for $3,000. I've started stripping it down and will clean it up and rebuild it, with the view of running it on E85. I've reworked the design of the steering rack location to have it correctly in f...